Roasters

Roaster, as the name specifies is used to roast the material, usually for spices and food sector. In this operation the excess moisture is removed and the taste of the blend changes for direct application to food products, without further frying or roasting. Roasting reduces bacterial growth and increases the product life. As the heating is carried out by the indirect heating method, the aroma loss is low. It can be used for roasting various types of individual or mix spices products comprising Coriander, Fenugreek seeds, Fennel (Saunf), Bay leaf (Tej Patta) /Cinnamon, Cumin (Jeera), Sesame etc.

Roasters are Roasters cum Blenders with steel fabricated ribbons inside. It not only roasts but also blends (in case of zero heat application, it is used as a Blender). It uses thermic fluid and electric heater combination for its heat development and its retention purpose. The instrumentation available controls the highest temperature of the thermic fluid (250 Deg C). After reaching this high
temperature, it stops further heating and only restarts once the prefixed user defined low temperature is reached.

The Spice Roasters are batch type machines and are supplied as a complete package consisting of process chamber, heating system, drive unit, & pre-wired control panel. Our specially designed spiral ribbons give the best Roasting results due to three-dimensional action. Thus, every particle comes equally in contact with the heating zone and is roasted equally. It is safe, have multiple aspect and definitely a preferred roasting device.

Operation details
  • A thermic fluid is filled in the jackets of the roaster. This fluid is heated through electrical heaters to maximum temperature of about 250 Degree Celsius
  • This fluid heats up slowly. However, after attaining maximum temperature, it retains the same for adequate period, providing enough time for the material to rotate, roast and blend simultaneously
  • Once fully heated, it supports in roasting the entire material in short time, by avoiding burning of peripheral material
  • A thermostat-based temperature and system controller is used to regulate the temperature in the thermic fluid.
  • All roaster is puff insulated to avoid heat loss and accident due to high temperature process.
  • Capacity : 22 – 5000 ltrs
  • MOC : SS/MS (application based or user defined)
  • Temperature : Up to 250 degree Celsius
  • Design : Customized
  • Voltage : 240 V/ 1 phase ,440 V/ 3 phase

Industries

Cement
Agro - chemicals
Chemicals
Minerals
Paints
Pharma - ceutical
Steel
Food

The RIECO Service Network: quick, reliable, competent, worldwide.

Other Products & Solutions

Send Inquiry